The Brat Pack Blog Train

Pages

Friday, December 30, 2011

FTU Tutorial - To Paris With Love

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on December 30, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Keith Garvey Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com
FTU Scrapkit called Love in Paris by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 80, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#05. Apply my mask#80. Merge mask layer visible.
Select element#06, resize to (500x544). Copy and paste to center of tag.
Select element#48, no need to resize. Copy and paste to bottom of tag.
Select element#16, resize to (200x300). Copy and paste to upper top center of tag.
Select element#55, no need to resize. Copy and paste to middle of tag.
Select element#51, resize to (200x341). Copy and paste on top of mannequin white.
Select element#52, resize to (200x275). Copy and paste to mannequin black.
Select element#45, no need to resize. Copy and paste to upper right corner of tag.
Select again this time flip image. Copy and paste to lower left side of tag.
Select element#46, no need to resize. Copy and paste to middle right side of tag.
Select element#16, no need to resize. Copy and paste to bottom center of tag.
Select tube, sizing will vary. Copy and paste on top of element#16.
Select element#21, resize to (100x178). Copy and paste to lower right side of tag.
Select element#50, resize to (100x38). Copy and paste to bottom of tag on right side.
Select element#49, resize to (100x76). Copy and paste to bottom of tag on right side.
Select element#22, resize to (50x100). Copy and paste on couch under your tube.
Select element#47, resize to (50x50). Copy and paste above element#22.
Select element#18, resize to (100x120). Copy and paste to lower left side of tag.
Add name, url, copywrite and watermark.
Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**

Friday, December 23, 2011

PTU Tutorial - Naughty or Nice

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written December 23, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tube by Alex Prihodko. You must have a license to use his art which you can get here: http://picsfordesign.com
PTU Scrapkit called So Christmas from Butterfly Kisses Scraps  You can find this kit here: http://bkscraps.blogspot.com/2011/11/so-christmas.html Thanks Deanna
Mask of choice. I used my mask# 79, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero – Porcelain
 Let's begin shall we.
Open a new image,  600x600.
I used paper#15. Apply my mask#79. Merge mask layer visible.
Select corner#2, no need to resize. Copy and paste to upper left side of mask. Select again, this time flip, then mirror. Copy and paste to bottom of right side of mask.
Select glitter, resize to (600x253). Copy and paste twice. Once to top of tag and then to bottom of tag.
Select sparkle, resize to (600x565). Copy and paste to center of tag.
Select frame#4, resize to (400x440). Copy and paste to center of tag. Add a drop shadow.
Select paper#14, resize to (400x400). Copy and paste behind the frame. Erase any excess you do not need.
Select tube, resizing will vary. I put a close up inside the frame. Then made it look like she is coming out of the frame. Erase any excess you do not need.
Select wordart#2, resize to (200x94). Copy and paste to bottom left side of tag.
Type the word or, add it to the bottom of wordart#2.
Select wordart#3, resize to (200x98). Copy and paste to bottom of your word or.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Thursday, December 22, 2011

PTU Tutorial - Garvey Christmas

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written in December 22, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
I am using a beautiful tubes by Keith Garvey. You must have a license to use his art which you can get here: http://psptubesemporium.com
PTU Scrapkit called Holly Wishes from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
Plug-ins Xero – Bad Dream
Font of your choice.
Let's begin shall we.
Select wordart#4, resize to (600x349).
Select beadscatter, resize to (600x157). Copy and paste 4 times and place them behind wordart. Spread them out to cover background.
Select your Garvey tubes. Resizing will vary depending on the tube. Copy and paste them randomly around your tag.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Winter Shivers

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on December 22, 2011.
This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Dean Yeagle Tubes art. You must have a license to use his art which you can get here: http://www.cdoestore.com. You will need a full body tube with a close-up.
PTU Scrapkit called Christmas Ice by NaughtyAngelzCreationz.  You can find this kit here:  http://www.scrapsandthecity.com. Thanks NaughtyAngel http://naughtys-creations.blogspot.com
Mask of choice. I used my mask#80, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Plug-ins Xero – Porcelain
Font of your choice.
Let's begin shall we.
Open new image 600x600.
I used paper#2. Apply my mask# 80. Merge mask layer visible.
Select ele#23, no need to resize. Copy and paste to upper right side of mask.
Select ele#6, resize to (600x580). Copy and paste over mask.
Select ele#42, no need to resize. Copy and paste to upper right side of tag.
Select tube, resizing will vary. Copy and paste on top of horse.
Merge all layers. Resize to (400x400).
Open new image (600x600).
Select ele#36, no need to resize. Copy and paste to bottom of new image. Copy and paste tag globe you just made. Paste it on top of the globe base.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Porcelain. Play with the settings until you find the look you want, then apply.


Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Monday, December 12, 2011

FTU Mask #80

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.


Sunday, December 4, 2011

FTU Mask #79

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love.


Monday, November 28, 2011

FTU Tutorial - Purple Passion

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Verymany Tubes art. You must have a license to use her art which you can get here: http://picsfordesign.com/
.FTU Scrapkit called Free Like A Bird by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 74, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#4. Apply my mask#74. Merge mask layer visible.
Select elem02, resize to (600x417). Copy and paste to center of tag.
Select elem17, no need to resize. Copy and paste to bottom of tag.
Select again, this time flip and paste to the top of tag.
Select elem05, resize to (600x587). Copy and paste to center of tag. Add a drop shadow.
Select elem1, resize to (300x225). Copy and paste at the top of elem05. Add a drop shadow.
Select paper03, resize to (400x400). Copy and paste behind frame. Erase any excess showing.
Select elem21, resize to (200x200). Copy and paste to lower left side of frame.
Select elem19, resize to (200x189). Copy and paste to middle right side of frame.
Select tube, resizing will vary. Copy and Paste behind frame. Erase excess frame to make it look like your tube is coming out of the frame.
Select tube again. Resizing will vary. Copy and paste another version of you tube on the right hand side of your tag.
Add name, url, copywrite and watermark.

Merge all layers.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Sexy Merry Christmas

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Robert Alvarado Tubes art. You must have a license to use her art which you can get here http://psptubesemporium.com
PTU Scrapkit called Jolly Christmas from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
Mask of choice. I used my mask# 78, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero – Bad Dream
 Let's begin shall we.
Open a new image,  600x600.
I used paper#18. Apply my mask#78. Merge mask layer visible.
Select tree2, resize to (600x600). Copy and paste on center of mask.
Select wordart, resize to (600x587). Copy and paste on top of tree.
Select tube, resizing will vary. Copy and paste it on top of Christmas. Erase portions of Christmas so the your tube appears woven into it.
Add a drop shadow to tube and wordart.
Select the different color ornaments, resize them to different sizes. Copy and paste the all around the wordart. Make sure it looks like that are hanging from the words. Add drop shadows to all the ornaments.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Bad Dream. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


PTU Tutorial - Erotic Christmas

This tutorial is of my own creation and any resemblance to any other tutorial is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against my TOU's.
This tutorial was written on November 28, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Barbara Jensen Tubes art. You must have a license to use her art which you can get here http://www.eroticartistgallery.com
PTU Scrapkit called Ice Aqua Xmas from A Taggers Scrap.  You can find this kit here: http://itsbacchus.blogspot.com/. Thanks Jo!
Mask of choice. I used my mask# 78, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
Plug-ins Xero - Radiance
 Let's begin shall we.
Open a new image,  600x600.
I used paper#7. Apply my mask#78. Merge mask layer visible.
Select glitter#2, no need to resize. Copy and paste to center of tag.
Select snowflakescatter, resize to (300x445). Copy and paste twice. Once to upper left side of tag, then to lower middle of right side of tag.
Select sparkles#5, no need to resize. Copy and paste to upper center of tag.
Select tree#3, resize to (300x570). Copy and paste to center of tag.
Select presenthanger, no need to resize. Copy and paste at top of tree. Select your eraser, erase part of the hanger to were it looks like it is hanging from the star on the tree.
Select giftboxes, resize to (200x200). Copy and paste to left side bottom of tree.
Select present#4, resize to (200x200). Copy and paste to bottom right side of tree.
Select present#1, resize to (100x100) Copy and paste in front of gift boxes on left hand side.
Select present#5, no need to resize. Copy and paste on left side behind gift boxes.
Select giftbox#3, resize to (150x150). Copy and paste to lower right side of tag.
Select snowman, no need to resize. Copy and paste to right side of tag. Place him behind some presents.
Select the bears, no need to resize. I cut out the small bear from the scrap. I then copied and pasted him on top of the giftboxes.
Select tube, resizing will vary. Copy and paste to behind present on left hand side.
Add name, url, copywrite and watermark.
Merge all layers.
Go to effects, plugins, xero, Radiance. Play with the settings until you find the look you want, then apply.
Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria


Saturday, November 26, 2011

FTU Mask #78

To save my mask, just click on image to get correct size. The right click and save to your computer. If you save, leave some love. 


Wednesday, November 16, 2011

PTU Tutorial - Pinky Sweet

This tutorial is of my own creation and any resemblance to any other tuts is purely coincidental. This tutorial is for personal use only, using it for monetary gain is against our TOU's.
This tutorial was written on November 16, 2011. This tutorial is copyrighted to Signature Collections Tutorials By Victoria and is registered with Tutorial Writers Inc.

Supplies Needed:
Tubes of your choice. I used Elias Chatzoudis Tubes art. You must have a license to use his art which you can get here: http://psptubesemporium.com.
PTU Scrapkit called Simply Elegant by Stefs Scrapkits.  You can find this kit here: http://stefs-scrapkits.blogspot.com/ . Thanks Stef!
Mask of choice. I used my mask# 73, which you can get here: http://mistressv-signaturecollections.blogspot.com/
Font of your choice.
 Let's begin shall we.
Open a new image,  600x600.
I used paper#11. Apply my mask#73. Merge mask layer visible.
Select ele32, no need to resize. Copy and paste to center of mask.
Select ele09, no need to resize. Copy and paste on top of ele32.
Select ele01, resize to (500x500). Copy and paste to lower center of tag.
Select paper06, resize to (400x400). Copy and paste behind the frame. Erase any excess you do not need.
Select tube, resizing will vary. Copy and paste to center of tag.
Select ele08, resize to (600x171). Copy and paste to bottom of tube.
Select ele50, resize to (600x78).Copy and paste on top of ele08.
Select ele45, resize to (100x100). Copy and paste twice, once to upper left side of tag. Then another to the middle right side of tag.
Select ele39, no need to resize. Copy and paste to upper right side of tag.
Select ele35, no need to resize. Copy and paste over tube.
Add name, url, copywrite and watermark.
Merge all layers.

Resize, to the size you want your finished tag to be.

Save as PNG.
And woohoo, you are finished!
Thank you for trying my tutorial. I would love to see your results and would love to post them on my blog. Contact information is listed on this home page.
Smooches,
**Victoria**
©Signature Collections-Tutorials By Victoria